Skip to main content
Roof Report Pro

Roof Report Pro vs RoofSnap

Aerial measurements tell you how much roof you have—AI analysis tells you what shape it's in

Generate professional inspection reports in 15 minutes.

RoofSnap and Roof Report Pro sit at opposite ends of a bid. RoofSnap helps you measure a roof from aerial imagery and turn those measurements into an estimate. Roof Report Pro records what is actually wrong with the roof, from photos taken at the property.

If your bidding runs from the office, this matters. An aerial measurement can tell you how much roof there is without a site visit. It cannot tell you what condition the deck, flashings or shingles are in. A bid built on size alone leaves that gap open.

This page walks through where each tool sits in an office-to-field workflow and when you would use one, the other, or both.

RoofSnap

Strength:

Aerial roof measurements

Strength:

Detailed diagrams and take-offs

Strength:

No roof access required

Strength:

Material estimates from measurements

Weakness:

AI damage detection not advertised

Weakness:

Inspection report generation not advertised

Roof Report Pro

Weakness:

Aerial measurements not advertised

Weakness:

Measurement diagrams not advertised

Neutral:

Requires on-site photos

Weakness:

Not for estimating/take-offs

Strength:

AI damage detection built-in

Strength:

Full inspection report generation

Where RoofSnap Excels

RoofSnap is an estimating tool. It starts with aerial imagery, so you can size up a roof from your desk before anyone drives to the property.

The measurements feed take-off diagrams. Those diagrams show each roof plane and edge, which helps with ordering materials and planning the crew.

From the measurements and diagrams, you build the estimate. For contractors who quote many jobs a week, doing the first pass remotely saves trips to properties that never turn into jobs.

Remote measurement also helps with first quotes and hard-to-reach properties, where you want a number before committing to a visit.

Where Roof Report Pro fits next to RoofSnap estimating

Roof Report Pro works from the field, not the desk. Someone photographs the roof up close, and the checklist makes sure nothing is skipped: underlayment and deck, then surface materials, then edges and flashings.

AI analyzes each photo against its section and tags findings by damage type, severity and location across 78 evidence markers. The inspector reviews every finding and can override any of it. The result is a report that shows what was found, where, and in what material.

That evidence changes what goes into an estimate. If the documented condition shows a section with deck problems or a discontinued shingle, the estimator knows before pricing, not after the crew arrives. Material classification covers 12 material types, tier, and possible brand and product line.

Roof Report Pro produces three reports from one inspection, each written for its reader: a Standard report for the homeowner; a detailed Forensic report built from the same photos with no extra site visit; and, coming soon, an Expert report prepared for attorneys.

From office measurement to field verification

The two tools follow the order most bids happen in: measure first, verify second.

In the office, you pull aerial measurements to get a working number. In the field, an inspector documents the roof with Roof Report Pro. Back in the office, the estimator compares the two: the measured size and the documented condition. Sections with findings get priced for what is actually there.

This keeps each tool honest about its limits. Aerial measurements are fast but do not see condition. A field inspection sees condition but does not produce measurements. Used in order, neither has to pretend to be the other.

Example Workflow

  1. 1

    Pull aerial measurements to get a working size and material estimate

  2. 2

    Send an inspector to the property with the Roof Report Pro checklist

  3. 3

    Capture close-up photos section by section

  4. 4

    Review and override the AI findings, then generate the report

  5. 5

    Compare the documented condition against the measured sections

  6. 6

    Finalize the estimate and share the report with the homeowner

Feature Comparison

RoofSnap handles aerial measurements. Roof Report Pro handles AI damage detection. Different stages of the same job—here's when you need each one.

Feature comparison: RoofSnap vs Roof Report Pro
FeatureRoofSnapRoof Report Pro
Primary purposeAerial measurementDamage inspection
Roof measurementsYes, from satellite/aerialNo
Take-off diagramsYesNo
AI damage detectionNot advertisedYes, 78 evidence markers per photo
Material classificationNot advertised12 material types, brand ID, discontinued detection
Inspection reportsNot advertisedYes, professional
Works togetherMeasure before the jobDocument findings
Comparison based on each company's publicly available information as of November 2026. Features change; check with each vendor for current details.

Who Should Use What?

Use RoofSnap if...

You estimate from the office and want measurements, take-off diagrams and material quantities without visiting every property first.

Use Roof Report Pro if...

You want the roof's condition recorded in a structured report with photos, findings and materials identified.

Use Both if...

You measure remotely to quote quickly, then send someone to document condition before the final price.

Frequently Asked Questions

The Bottom Line

RoofSnap helps you size and estimate a roof from the office. Roof Report Pro records the condition of the roof from the field. If you bid remotely, adding a documented inspection before the final price closes the gap that aerial measurement leaves open. If you only need measurements, RoofSnap is the right tool on its own. Using 3D capture instead? See the Hover comparison.

Build Your Complete Roofing Software Stack

See how RoofSnap fits with CRMs, estimating tools, and AI reporting in our interactive Stack Builder.

Build Your Stack

Ready to Make the Switch?

Try Roof Report Pro free with 10 reports. No credit card required.

See the deliverable

View real Roof Report Pro reports — and share them

A standard report for the homeowner and a detailed forensic report, from the same inspection. No account needed.

View the sample report onlineor share this link with others so they can see it as well
roofreportpro.app/0yKEOu7aRgVZlGmA