Can Hover detect roof damage?

No. Hover creates 3D models for measurement purposes—it tells you the dimensions of the roof but doesn't analyze the roof's condition. You'll see accurate square footage and pitch, but not hail damage, missing shingles, or wear patterns. Learn about the [12+ damage types](/features/ai-evidence-analysis) our AI detects, from hail strikes to deteriorated flashing.

Can Roof Report Pro measure roofs?

No. Roof Report Pro focuses entirely on damage detection and inspection documentation. We don't generate measurements, material estimates, or dimensional data. For accurate roof measurements, you'll want a dedicated measurement tool like Hover, RoofSnap, or EagleView.

Do I really need both tools?

It depends on your business. If you only do insurance inspections without follow-up repair work, you might not need measurement tools. If you only do retail roofing without insurance claims, you might not need inspection reports. But if you do insurance restoration—inspecting damage and then bidding repairs—both tools serve essential functions in your workflow.

Which should I invest in first if I'm starting an insurance restoration business?

Start with Roof Report Pro. The inspection report is what gets the homeowner's claim approved—without that, there's no repair job to bid. Start with our [free trial](/pricing)—no credit card required—to experience the AI damage detection firsthand. Once you're generating consistent inspection work and claims are getting approved, add Hover for efficient measurement on the repair bids that follow.

Can I use Hover photos in Roof Report Pro?

The ground-level photos used for Hover's 3D modeling aren't typically detailed enough for damage inspection. Effective inspection documentation requires close-up photos showing damage details—taken from on the roof or with a drone. While Hover excels at capturing property geometry, inspection photos need a different approach.

Is there any overlap between the two platforms?

Minimal. Hover measures. Roof Report Pro inspects. The only overlap is that both involve roofs—but they address completely different questions. Hover answers 'How big is this roof?' Roof Report Pro answers 'What's wrong with this roof?' Both questions matter, but they require different tools to answer properly.

Roof Report Pro vs Hover

Different tools for different jobs—measurement vs damage documentation

Generate insurance-ready inspection reports in 15 minutes.

Start free — 5 reports, no card See pricing

Hover has revolutionized how contractors approach exterior measurements, turning smartphone photos into accurate 3D property models. If you're in roofing, you've probably seen Hover's impact on the bidding process—no more climbing ladders just to get measurements for a quote. But if you're also doing insurance inspections, you might be wondering how Hover compares to Roof Report Pro.

The short answer: they're completely different tools that solve completely different problems. Hover tells you how much roof there is. Roof Report Pro tells you what condition it's in. One helps you bid jobs accurately. The other helps homeowners get insurance claims approved.

This comparison will clarify what each tool does, where they fit in your workflow, and why many successful roofing contractors use both. We'll be honest about what each does well and what each doesn't do at all.

Hover

Accurate 3D roof measurements

Material quantity calculations

Works on all exterior renovations

Visualization tools for design

No AI damage detection

No inspection report generation

Roof Report Pro

No measurement capabilities

No material calculations

Roofing focused only

No design visualization

AI damage detection built-in

Full inspection report generation

Where Hover Excels

Hover's 3D measurement technology is genuinely impressive, and their approach has transformed how contractors estimate exterior projects. Understanding their strengths helps clarify why Roof Report Pro exists as a separate tool.

The core measurement capability is Hover's defining feature. Take photos of a property from the ground, and Hover's technology creates an accurate 3D model with precise dimensions. For roofs, this means square footage, pitch, ridge lengths, valley lengths, and edge measurements—everything you need for material calculations. The accuracy is remarkable, often matching manual measurements within acceptable tolerances.

Material quantity calculations flow directly from the measurements. Once Hover knows your roof dimensions, it can estimate shingle bundles, underlayment rolls, flashing lengths, and other materials. For contractors who price jobs by material plus labor, this streamlines the entire estimation process. No more mathematical gymnastics converting roof squares to material quantities.

The visualization capabilities add value beyond pure measurement. Homeowners can see their property in 3D and visualize different material options—shingle colors, siding styles, window configurations. For contractors doing sales consultations, this visual selling tool can help close deals. Showing a homeowner exactly how their house will look with new architectural shingles is more compelling than handing them a color swatch.

Hover works across all exterior trades, not just roofing. Siding, windows, doors, gutters—the same 3D model serves multiple estimation needs. For contractors who offer comprehensive exterior services, one Hover model can inform multiple project bids. This versatility makes the platform valuable for multi-trade operations.

Where Roof Report Pro Shines

Hover measures roofs. Roof Report Pro inspects them—through a structured, checklist-driven pipeline that turns photos into defensible evidence.

Every inspection follows an inside-out sequence: underlayment and deck conditions first, then surface materials, then edges and flashings. AI analyzes each photo against its section context, tagging findings by damage type, severity, and location across 22 damage categories. Evidence is quantified and tied to the material it affects—not generic photo captions. Hover tells you the dimensions of a roof; Roof Report Pro tells you what it is made of and what condition it is in.

Material classification runs automatically: 19 material types, material tier, and possible brand and product line (GAF Timberline HDZ, CertainTeed Landmark, etc.). Discontinued products are detected and flagged with insurance implications. A discontinued shingle that can't be matched for partial repairs may qualify for full replacement—that context can make or break a claim.

When a carrier denies a claim, any basic report upgrades to expert—building code citations, manufacturer installation specs, denial-pattern counters, litigation scoring, and a court-ready audit trail—without a re-inspection. Hover provides the measurements for the repair bid that follows. Roof Report Pro makes sure there's an approved claim to trigger that bid.

Using Hover + Roof Report Pro Together

Hover and Roof Report Pro address different phases of the roofing workflow, which is why many contractors use both. Hover helps you understand what you're working with. Roof Report Pro helps you document what needs to be fixed.

Consider the typical insurance restoration process: a storm damages a roof, the homeowner files a claim, and a contractor gets involved. The inspection phase requires detailed damage documentation—that's Roof Report Pro. But once the claim is approved and it's time to bid the repair, you need accurate measurements—that's Hover.

Using both tools means you're never estimating based on incomplete information. The damage report shows exactly what's wrong. The measurements show exactly how much roof needs to be addressed. Together, they give you complete project intelligence.

This split-tool approach also keeps each tool focused on what it does best. Hover doesn't try to be an inspection platform, so it can focus on measurement accuracy. Roof Report Pro doesn't try to generate measurements, so we can focus on damage detection and documentation. You get best-in-class capabilities for both functions.

Example Workflow

1
Storm damage reported → Schedule inspection visit
2
On-site inspection → Photograph damage thoroughly
3
Document damage → Upload to Roof Report Pro for AI analysis
4
Generate inspection report → Professional PDF for insurance claim
5
Insurance approves claim → Time to bid the repair work
6
Order measurements → Take Hover photos or request existing model
7
Receive 3D model → Accurate dimensions for material calculations
8
Create bid → Combine damage scope with measured quantities
9
Present to homeowner → Detailed proposal based on real data
10
Win the job → Complete repairs using accurate material quantities

Feature Comparison

Hover measures your roof with 3D models. Roof Report Pro documents the damage with AI. Different jobs, same project—see how contractors use both.

Feature comparison: Hover vs Roof Report Pro
Feature	Hover	Roof Report Pro
Primary purpose	3D measurement	Damage documentation
Roof measurements	Yes, accurate 3D	No
Material estimates	Yes	No
AI damage detection	No	Yes, 22 types per photo
Material classification	No	19 material types, brand ID, discontinued detection
Insurance reports	No	Yes, purpose-built
Use together	Measure for bids	Document for claims
Inspector override control	N/A (no damage analysis)	Full override of all AI findings before report delivery

Who Should Use What?

Use Hover if...

You need accurate roof measurements for bidding and material calculations. Hover's 3D modeling technology provides dimensional data without climbing on the roof.

Use Roof Report Pro if...

You need professional damage documentation for insurance claims. Roof Report Pro's AI analysis and inspection reports help homeowners get claims approved.

Use Both if...

You do insurance restoration work that requires both damage documentation AND accurate measurements for repair bids. Using both tools gives you complete project intelligence—condition assessment from Roof Report Pro and dimensional data from Hover.

Frequently Asked Questions

The Bottom Line

Hover and Roof Report Pro solve different problems and work together rather than competing. Hover measures: accurate 3D dimensions for bidding and material calculations. Roof Report Pro inspects: structured, checklist-driven evidence capture with AI findings tagged and quantified, professional reports, and litigation-grade upgrades when claims get denied. For insurance restoration contractors, Roof Report Pro creates the documentation that gets the claim approved; Hover measures the roof for the repair bid that follows. See how our Hover integration connects the two platforms. Looking at other measurement tools? See how we compare to RoofSnap as well.

Build Your Complete Roofing Software Stack

See how Hover fits with CRMs, estimating tools, and AI reporting in our interactive Stack Builder.